DESCRIPTION:

YPL-190 appearance is made of special alloy and high temperature resistant polyether ether ketone plastic, with the advantages of high mechanical strength, high pressure resistance, high temperature resistance, environmental protection, non-toxic, wear resistance and corrosion resistance, its tight structure design makes the instrument protection level of IP68, enough to meet the requirements of high humidity, high heat and airtight harsh environment.

 

YPL-190 temperature measurement sensor is the latest and most advanced semiconductor, with temperature measurement range up to 140°C and measurement accuracy up to 0.1°C. The YPL-190 has excellent storage performance and can record up to 25920 sets of data, which is sufficient to meet the measurement and recording needs of most users. And the instrument is equipped with professional PC application software. When the user installs the USB driver and software on the PC end, he can connect the device to the PC port through the USB line to configure the parameters of the instrument and read the recorded data. When using the instrument, the user can set or modify the recording interval, high/low alarm limit and control the instrument, and can download the data stored in the instrument to the PC terminal for viewing, analysis and printing. In special applications, users can calibrate the instrument temperature measurement data through the PC application software to correct the instrument parameters.

NOTES:

• Please operate the product correctly for the intended use within the parameters specified in the technical data.

• Do not operate the instrument in signs of damage to the housing or connected cables.

• Do not store the instrument together with the solvent.

• Please contact professional after-sales service in time if you have any doubt.

 

WARNINGS:

• Using the instrument in violation of regulations with potential safety hazards !

- It is forbidden to use this instrument in an oxidizing and corrosive environment!

- Do not place batteries in an environment above 140°C and must be used under the environmental conditions specified

by this instrument (especially the operation environment)!

- We will not be responsible for used forcibly in violation of regulation with any danger in the use process!

• When the temperature is higher than 85°C, it is forbidden to set the sampling interval less than 10 seconds!

• When the temperature is higher than 125°C, it is forbidden to set the sampling interval less than 1 minute!

- After the high temperature measurement, please check whether the battery is abnormal. If abnormal, it should be

replaced in time.